Taken from the blog: http://junkbots-hayleystevenson.blogspot.com/2011/07/day-4-design-and-paperwork.html PicassoBot Assembly Instructions for the PicassoBot Using the template provided, cut out a BASEPLATE for your JunkBot. Place the template on the thick card, and cut out using a craft knife. Be careful not to cut anything that is under the card. Depending on the type of card, you made need to make 2 BASEPLATE’s and stick them together to increase the strength. If you wish, can now decorate your baseplate, but remember that the holes need to be accessible after decorations! Now you need to make the legs. Take 3 of your straws, and place then together, lengthways to make a thicker leg. The end of the straws should look like a triangle. Next, extend the straws to their fullest possible length, and bend the ridged part to make a 45degree angle. Once you have done this, secure the straws together using a strip of tape at the top of the straws. Now, look at the o...
This is an initiative to mix sustainability, engineering and computing to students.