Junkbots

Poster presented at PyCon UK 2016, 17th September 2016. Pyconuk16  junkbots   from  Scott Turner DOI:  10.13140/RG.2.2.28682.67520 For more details on the three builds: Raspberry Pi based:  http:// bit.ly /2c87qex Basic Micro:Bit build:  http:// bit.ly /2cmJo0B Radio Control Micro:Bit  Junkbot :  http:// bit.ly /2cMHpDa All opinions in this blog are the Author's and should not in any way be seen as reflecting the views of any organisation the Author has any association with. Twitter  @scottturneruon If you would like to know more about the Junkbots project contact scott.turner@northampton.ac.uk

I In an earlier  post , I showed how you could build a Micro:Bit controlled Junkbot. In this post I want to show a modification to it, to use one Micro:Bit to control the junkbot controlled by another Micro:Bit. A nice feature of the Micro:Bit using micropython, is it can send and receive simple messages via radio - so here is my take on it. The first problem is the Python editor available on  https://www.microbit.co.uk/  does not seem to work with the radio API. One solution to this is to change to the  mu  editor. Two pieces of code are needed. Sending Code for the 'remote' control: Essentially it is set up to send two messages, via the built-in radio module,  spinl  or  spinr  depending on which button is pressed. import radio from microbit import button_a, button_b radio.on() while True:    if button_a.is_pressed():        radio.send('spinl')    if button_...

A new direction has been developed for the junkbot project ( http://junkbots.blogspot.co.uk/ ) ; previously Raspberry Pis have been used to control the  junkbot’s  movement ( http://robotsandphysicalcomputing.blogspot.co.uk/2016/01/python-junkbot.html )  – but what about the recently released Micro:Bits; can it be used to control a junkbot? Matthew Hole, a student from Wrenn Academy, Northamptonshire ; has been investigating this idea whilst on a Nuffield Research Placement ( http://www.nuffieldfoundation.org/nuffield-research-placements)  working with Dr Scott Turner, University of Northampton. The project was to look into developing junkbots controlled using a Micro:bit and also to produce some materials for schools to use with or without outside assistance. What is a Junkbot? For this project, it is a moving ‘bot’ made from waste materials, combined with an electric motor and a programmable device (in this case a Micro:Bit) to control ...