Skip to main content

How Making Robots Captivates Kids' Imaginations

Not actually part of the Junkbots project but certainly follows the same sentiment.

How Making Robots Captivates Kids' Imaginations | Edutopia:

'via Blog this'



If you would like to know more about the Junkbots project contact scott.turner@northampton.ac.uk

Comments

Popular posts from this blog

junkbots 3 - bring it all together

Junkbots session 3: Move the robot but now there are rocks in the way.  This is the last of three posts - Introduction and sequence - Loops and just having fun - This one: Making decisions and bringing it all together. What is the Junkbots project The Junkbots project has been running for a number of years as an initiative to bring sustainability, computing and engineering together by building bots out of junk; details of the project can be found at.  https://junkbots.blogspot.com/  . Junkbots is an extension of the Research into the teaching problem-solving going on at the University of Northampton please feel to visit  https://computingnorthampton.blogspot.com/2019/01/problem-solving-research-outputs-and.html  for more details.   What are we going to do? ·         Play with a Scratch robot on the screen! ·         Build on the routines from the previous session. ·    ...

Junkbot Raspberry Pi: 3 How to do it

Figure 1 In previous posts I start looked at using ScratchGPIO to control a junkbot  ( http://junkbots.blogspot.com/2014/08/junkbot-pi-1-scratchgpio.html ) and showed a Pi controlled junkbot briefly in action ( http://junkbots.blogspot.co.uk/2014/08/junkbot-raspberry-pi-2-raspberry-pi.html ). In this post I aim to discuss - Choice of motor controller card - Provide an example of a drawing junkbot controlled through Scratch and Raspberrry Pi Choice of interface/Controller card The card choosen was the 4Tronix PiRoCon card  ( http://4tronix.co.uk/store/index.php?rt=product/product&product_id=182 ). Selected for four reasons - Price is reasonable (in my opinion). - Fits straight onto the Pi through the GPIO - no extra cables needed. - ScratchGPIO has it as an addon so it makes programming it even easier (see http://cymplecy.wordpress.com/2013/10/31/pirocon-from-4tronix/ ). - Others are using it for robot projects. Use it is quite easy plug the board directl...

Controlling 'junk' robot - three options

Three approaches to control it will be considered here: - via Raspberry Pi; - via Micro:Bit -via Crumble controller 1. Raspberry Pi based In this Raspberry Pi based Junkbot design a combination of Python and Pimoroni's  Explorer HAT PRO  are used to control it. Explorer HAT Pro is a good choice, it can control two motors with a library provided to simplify the programming. For this the Junkbot was the one shown above: a drinks can, pen, LEGO bits, motor and broken propellor. Before the Explorer HAT can be used the library needs to be installed via the Terminal and the instructions below curl get.pimoroni.com/explorerhat | bash Python code to control the junkbot is shown below. import explorerhat from time import sleep def spin1(duration):     explorerhat.motor.one.forward(100)     sleep(duration)     explorerhat.motor.one.stop() def spin2(duration):    ...